INTRODUCING QUICK LOCK II

2x STIFFER 2x STRONGER

In 2020, Starboard Foils introduced the quickest foil assembly system with Quick Lock.

For 2022 and continuing into 2023, Quick Lock II offers 55% more thickness and a new Lock-Slot, making the front wing connection twice as stiff and twice as strong for impeccable control and flight stability.

WHAT MAKES IT SO STIFF?

The cross section of the front wing male ferrule is 55% thicker compared to the original Quick Lock: less twist = more control.

The tail wing section and the mast slot is the same as on the original Quick Lock fuselage, so masts and tail wings are cross-compatible.

The new Lock-Slot on the top adds an an extra mechanical locking point. 

The new octagonal shape of the male ferrule, with flat sides and sharp corners, maximizes the interlocking surface areas.

DESIGN TO INNOVATE:

ADJUST YOUR FUSELAGE LENGTH

The new Quick Lock II comes with 20mm spacers that allow you to extend the foil's wing-base by up to 40mm

Trimming Recommendations:

1 - No spacers Maximum maneuverability
2 - Tail spacer More flight stability, less maneuverability
3 - Front spacer More power and upwind drive
4 - Both spacers More power and maximum stability, minimum maneuverability

WING-BASE MEASUREMENTS

With Quick Lock II, our wing-bases can be adjusted up to 4cm using two 2cm spacers.

E-Type, S-Type and Glider wing-bases are measured using the 36cm tail piece that comes with the wing sets. 31cm and 41cm tail pieces are available as an upgrade item.

The Glider Pro's tail piece can be cut up to 8cm shorter for pro-riders who look for the shortest wing-base.

Wing-base measurements will vary depending on the actual front and tail wing sizes used.


A SUPER-STIFF V8 ALUMINIUM MAST

V8 PROFILE

19mm thick and thicker walls: the V8 profile makes the mast extremely stiff. The cross-sectional area is the same as the V7 mast, resulting in the same mast weight per cm.

3cm narrower: the reduced chord adds more glide and flying efficiency.

V8 TOP PLATE

The V8 Top Plate continues to use Starboard Foils' innovative side-bolts solution for a rock-solid connection. A generous fillet radius was added at base to further stiffen the connection between mast and board.

Compared to the V7 system, we lose the Deep Tuttle adaptability since the new V8 mast is 19mm thick: thicker than a Deep Tuttle box.

V8 FUSELAGE ADAPTER

The connection between mast and fuselage uses an new aluminium CNC-machined adapter, for maximum connection stiffness.

THE V8 MAST GIVES MAXIMUM FLIGHT STABILITY AND PUMPING EFFICIENCY

MAST ANGLE SPACERS

A 1.5° mast angle spacer is supplied with each mast set and a 3° mast angle spacer is also available as an accessory item.

Use these spacers to lift the nose higher when flying, if the board feels it is pointing too far down.

THE FOILS (WING SETS):

S-TYPE

(LOW ASPECT)

For low speed stability, maximum stall-resistance and a unique carving sensation. Larger sizes are ideal for first time foilers, smaller sizes are ideal for advanced foilers looking for maximum carving grip in waves.

Combine this Wing Set with a Monolithic Mast Set or Aluminium V8 Mast Set to make a complete foil

Front Wings: 1200 / 1500 / 2000 / 2400
Tail Wing: RAZR 250
Fuselage: Tail Piece 36cm
Aspect Ratio: 3.9-4.2

E-TYPE

(MEDIUM ASPECT)

The all-rounder. The E-Type offers a mix of low-speed stability, stall-resistance through transitions, some glide and some speed and a nice carving sensation.

Combine this Wing Set with a Monolithic Mast Set or Aluminium V8 Mast Set to make a complete foil

Front Wings: 1100 / 1300 / 1500 / 1700 / 2000
Tail Wing: RAZR 250
Fuselage: Tail Piece 36cm
Aspect Ratio: 5.0-6.1

Glider

(HIGH ASPECT)

Wide, high aspect wings for maximum glide and flight efficiency. Larger sizes are ideal for lakes and flat water foiling in light wind conditions. Smaller sizes are suitable for performance foiling in windier conditions, foiling in waves and for wake foiling.

Combine this Wing Set with a Monolithic Mast Set or Aluminium V8 Mast Set to make a complete foil

Front Wings: 750 / 900 / 1100 / 1400 / 1700
Tail Wing: RAZR H.A.R. 250
Fuselage: Tail Piece 36cm
Aspect Ratio: 7.3 / 7.8 / 8.2 / 8.2 / 7.5

Glider Pro

(ULTRA HIGH ASPECT)

For maximum performance and for advanced foilers. The ultra-high aspect ratio combined with wider spans and a performance wing shape unlocks more speed for riders who are not afraid to sacrifice ease-of-use.

Combine this Wing Set with a Monolithic Mast Set, the Racing Mast or the Aluminium V8 Mast Set to make a complete foil

Front Wings: 550 / 700 / 900 / 1050
Tail Wing / Tail Piece: Pro 180 One Piece / 180 H.A.R.  One Piece
Aspect Ratio: 8.2 / 10 / 11.1 / 12.1

THE FOILS (MAST SETS):

Aluminium V8 Mast Set

The stiffest and heaviest mast option. A heavy mast helps to sink the foil for more stability before take-off

Combine this Mast Set with a Wing Set to make a complete foil

Mast: 72cm / 82cm / 92cm
Fuselage: Quick Lock II 40 Fuselage Front Piece
Mast sets include 20mm spacers and top plate mounting bolts

Monolithic Carbon MkII Mast Set

New for 2023! The lightweight, maneuverable and most responsive mast. New 2023 shape includes a sharper leading edge, sharper trailing edge and 1.5 degree rake built-in.

Combine this Mast Set with a Wing Set to make a complete foil

Mast: 72cm / 82cm / 92cm
Fuselage: Quick Lock II 40 Fuselage Front Piece
Mast sets include 20mm spacers, top plate mounting bolts and 3D washers

Monolithic Racing Mast

Our fastest wing foil mast.

Built in solid Ultra-High Modulus C400 Carbon, this mast is designed for racing. The bottom half is extra thin to unleash maximum speed while the top half is thick for added stiffness and a rock-solid connection to the board.

This item is sold as a mast alone, not a set. Combine with a Quick Lock II fuselage and wings or the Evolution MkII fuselage and wings from the windsurf foil collection to make a complete foil.

Mast: 86cm / 96cm
Fuselage: None
Does not include 20mm spacers or top plate mounting bolts

GLASS

A new line of entry foils

The Glass series are entry foils that are fully compatible and upgradable with Starboard Foils' Modular Foil Platform. 

The blue G100 wings are made from a pre-preg glass sandwich construction. The one-piece fuselage uses a non-adjustable Quick Lock II system for the front wing fitting.

All Glass series foils come with the V8 aluminium mast system.

S-Type 2000 Glass: 1249 EUR
E-Type 1700 Glass 1249 EUR
Glider 1400 1249 EUR
Components:
S-Type 2000 Glass: FW S-Type 2000 G100 // TW RAZR250 G100 // 61cm Hybrid Fuselage // 72cm V8 Mast
Components:
E-Type 1700 Glass: FW E-Type 1700 G100 // TW RAZR250 G100 // 66cm Hybrid Fuselage // 82cm V8 Mast
Glider 1400 Glass: FW Glider 1400 G100 // TW RAZR250 G100 // 66cm Hybrid Fuselage // 82cm V8 Mast

PARTS LIST

Front Wings

S-Type 2400 QLII
S-Type 2000 QLII
S-Type 1500 QLII
S-Type 1200 QLII

E-Type 2000 QLII
E-Type 1700 QLII
E-Type 1500 QLII
E-Type 1300 QLII
E-Type 1100 QLII

Glider 1700 QLII
Glider 1400 QLII
Glider 1100 QLII
Glider 900 QLII
Glider 750 QLII

Glider Pro 1050 QLII
Glider Pro 900 QLII
Glider Pro 700 QLII
Glider Pro 550 QLII

Masts

Alumnium V8 92cm
Alumnium V8 82cm
Alumnium V8 72cm

Monolithic Carbon 92cm MkII
Monolithic Carbon 82cm MkII
Monolithic Carbon 72cm MkII

Monolithic Carbon 96 87° DT C400
Monolithic Carbon 86 87° DT C400

V8 Top Plate Adapter
V8 Fuselage Adapter

Fuselages

Quick Lock II Front Piece 40*
Quick Lock II Tail Piece 41
Quick Lock II Tail Piece 36
Quick Lock II Tail Piece 31
*Does not include 20mm spacers
20mm Spacer QLII L
20mm Spacer QLII S

Tail Wings

RAZR H.A.R. 250
RAZR 250
RAZR 220

Pro 180 H.A.R. (One Piece)
Pro 180 (One Piece)

Wave 270
Wave 370
 English 
div.ht-tms--float-left-bottom{ display:none !important; }